MACE-Hard is an aliphatic 1-component waterborne formulation delivering excellent chemical and water resistance while providing good abrasion resistance and fast-setting properties. MACE-Hard is also available without solvent. This material is designed to be used as a tough exterior topcoat, sealer or as an underlying penetrating primer. The penetrating nature of these materials promotes its use for direct topcoating on porous and non-porous substrates masonry, wood, non-glazed tile, stucco, metal, composites and certain polymers. This material may also be used as a primer in many SuperSkin System’s coating applications. MACE-Hard is an air-dry system where it is normally spray or roll applied. This low viscosity dispersion dries clear in 10-15 minutes acquiring full-cure in 24 hrs or maybe forced dried at elevated temperatures. Acrylic color pigments and thickener additives may also be included to enhance its widely diversified use.
Technical Application Data
MACE-Hard is specically designed to normally fast dry at 60-90° F with ambient temperatures with 50-60% relative humidity yielding drying times of 10-15 min. Operational temperatures range from 20°F to 150°F. Recommended application is 1-2 medium wet coats with coverage of 100 sq.ft./ gal at 6 mil thickness.
|MACE-Hard Physical Properties
|Brookfield Viscosity @25°C RVT #3 @12 rpm
This technical data information is accurate to the best of our knowledge. SuperSkinSystems™ Inc. makes no warranty, expressed or implied within the materials on this website, its use or with its any application. SuperSkinSystems™ Inc. shall not be liable for material or application related injuries, material non-conformance, application failures or any consequential damage by the use of this product.