Rapid 1K is an aliphatic 1-component waterborne formulation delivering good chemical and water resistance while providing good abrasion resistance and fast-setting properties. It is designed to be used as a primer or topcoat sealer. This material is 42% solids and can be used on porous and non-porous substrates. This material is available in flexible, semi-flexible or rigid film.
Rapid 1K is an air-dry system where it is normally roll applied. This low viscosity dispersion dries clear and flexible in 10-15 minutes acquiring full-cure in 24 hrs or maybe forced dried at elevated temperatures. Rapid 1K-Topcoat is available in medium to high elongation formulations where flexibility is demanded. The high-flex version provides up to 600% elongation with a tensile strength of 2400 psi while the the medium-flex allows for 100%. Pigments and thickener additives may also be included to enhance its use.
Technical Application Data
Rapid 1K is specially designed to normally fast dry at 60-90° F with ambient temperatures with 50-60% relative humidity yielding drying times of 10-15 min. Operational temperatures range from 20°F to 150°F. Recommended application is 1-2 medium wet coats at 5-8 mils per coat wet thickness with coverage of 100 sq.ft./ gal. When using airless sprayer, use 0.011″ tip @2000 psi. Second coat should be applied when first coat achieves a dry tacky touch, i.e. no wet to the touch.
|Rapid 1K PHYSICAL PROPERTIES|
|Percent Solids (Clear)||42%|
|Brookfield Viscosity @25°C RVT #3 @12 rpm||1000|
|Tg (°C calc)||17|
|Rapid 1K PERFORMANCE CHARACTERISTICS|
|Accelerated Weathering QUV||ASTM D4587, QUV-A, 5000 hrs||Pass|
|Adhesion||ASTM D4541||393 psi|
|Abrasion Resistance||ASTM D4060||57 mg loss (CS-17) (1000 cycles)|
|Pencil Hardness||ASTM D3363||2B|
|Flexibility||ASTM D522, Method B, 1/8″||Pass|
Xenon UV Performance
This technical data information is accurate to the best of our knowledge. SuperSkinSystems™ Inc. makes no warranty, expressed or implied within the materials on this website, its use or with its any application. SuperSkinSystems™ Inc. shall not be liable for material or application related injuries, material non-conformance, application failures or any consequential damage by the use of this product.
There are no data sheets.