Aliphatic Systems

  • APA

    APA is a new revolutionary, zero VOC, non-conventional exterior, 100% polyurea coating. This product has been designed specifically to deliver the toughness and abrasion resistant properties of that of an aromatic polyurea but provides the capability of retaining color-fastness for a full range of pigmented colors. Unlike conventional aromatic polyurea, which in a white pigmented system turns yellow in hours when left in direct sun light, APA systems can withstand direct harsh sunlight experiencing no color change after 1 year. APA is available with different hardness and reactivities. APA is available in 2 versions – horizontal and vertical. Horizontal APA has a gel time of approximately 30-45 seconds allowing the ability to broadcast into it if desired, whereas Vertical APA is a quick set material allowing to be sprayed vertically without running. APA has excellent adhesion properties allowing it to be sprayed on all types of surfaces including spray foams. APA complies with FDA 21CFR 175.105 and 21 CFR 175.300. APA is also available with fire retardant additives. These additives allow APA to meet ASTM E84 Class A. APA uses a mix ratio of 1A – 1B. APA may be applied using high pressure heated plural equipment, low pressure heated equipment or using cold spray 2K cartridge equipment. Recommended heater settings are 140°F for both primary heaters and hose heater. Machine pressure should be set at around 2000 psi.

  • ClearSkin

    Clearskin is a 100% solid aliphatic roll on coating. There are two versions available as roll on.

    1. 12-15 minute pot life and set to touch in 30 minutes.
    2. 1 hour pot life and 45 minutes set to touch.

    Both produce a clear hard high gloss coating. Both 1&2 can be supplied in colors and both have excellent chemical and UV resistance. #1 has been found to have excellent electrical properties. 16 mils of coating can resist 10000 volts. Making it a great insulator.

    Clearskin makes an excellent coating for steel, concrete, wood and marine applications. Its ability to cure fast with no VOCs reduces downtime to return to service. Clearskin has excellent water and chemical resistance to meet any condition. Clearskin is optically clear but can be pigmented and can have anti-corrosive additives if needed.

  • Clearskin Flex-90

    ClearSkin Flex 90 (CSF-90) is a pour or molding aliphatic polyurea with a 90 shore A hardness. Gel time are adjustable from 30-120 seconds. Available in colors. CSF-90 has excellent UV resistance and color retention.

  • FireSkin 1K

    FireSkin™ 1K is a high temperature waterborne intumescent fire-resistant barrier coating that will withstand direct flame contact. It does not emit continuous smoke with E84 testing yielding 5=flame spread and 70=smoke during flame exposure. It is environmentally friendly and is used in demanding fire shielding applications such as mine safety, protecting steel frameworks, building foam insulation, utility poles, cedar shake roofs, styrene and polyurethane foam board and other flammable material protection. Designers also use this material’s unique decorative coating properties to enhance interior walls specified by fire-retardant requirements as acrylic texture chips may be added. 1K FireSkin also provides outstanding UV stability.

    It is a water-based formulation that is applied by low pressure air-less spray equipment, roller or brush. It is non-toxic and and may be appled in low-ventilated enclosed areas. Please call or email our Technical Support Group for any questions regarding material, application or prospective uses.

    GlowSkin is capable of being added to Fireskin 1K.

  • MACE-Flex

    Mace-Flex is an aliphatic 1-component self-crosslinking waterborne formulation delivering excellent chemical and water resistance while providing good abrasion resistance and fast-setting properties.
    Mace-Flex or Mace-Regular is designed to be solvent-free and used as a tough exterior topcoat, sealer or as an underlying penetrating primer. The penetrating nature of this material promotes its use for direct topcoating on porous and non-porous substrates masonary, wood, non-glazed tile, stucco, metal, composites and certain polymers. These materials may also be used as a primer in many SuperSkin System’s coating applications.

    Mace is an air-dry system where it is normally spray or roll applied. This low viscosity dispersion dries clear and flexible in 10-15 minutes acquiring full-cure in 24 hrs or maybe forced dried at elevated temperatures. Mace-Flex provides up to 200% elongation with a tensile strength of 2400 psi. Acrylic color pigments and thickener additives may also be included to enhance its widely diversified use.

  • MACE-Hard

    MACE-Hard is an aliphatic 1-component waterborne formulation delivering excellent chemical and water resistance while providing good abrasion resistance and fast-setting properties. MACE-Hard is also available without solvent. This material is designed to be used as a tough exterior topcoat, sealer or as an underlying penetrating primer. The penetrating nature of these materials promotes its use for direct topcoating on porous and non-porous substrates masonry, wood, non-glazed tile, stucco, metal, composites and certain polymers. This material may also be used as a primer in many SuperSkin System’s coating applications. MACE-Hard is an air-dry system where it is normally spray or roll applied. This low viscosity dispersion dries clear in 10-15 minutes acquiring full-cure in 24 hrs or maybe forced dried at elevated temperatures. Acrylic color pigments and thickener additives may also be included to enhance its widely diversified use.

  • MACE-Hard-SF

    Mace-Hard-SF is an aliphatic 1-component waterborne formulation delivering excellent chemical and water resistance while providing good abrasion resistance and fast-setting properties. MACE Hard is also available without solvent Mace-Hard-SF and both are designed to be used as a tough exterior topcoat, sealer or as an underlying penetrating primer. The penetrating nature of these materials promotes its use for direct topcoating on porous and non-porous substrates masonary, wood, non-glazed tile, stucco, metal, composites and certain polymers. This material may also be used as a primer in many SuperSkin System’s coating applications. Mace-Hard is an air-dry system where it is normally spray or roll applied. This low viscosity dispersion dries clear and flexible in 10-15 minutes acquiring full-cure in 24 hrs or maybe forced dried at elevated temperatures. Acrylic color pigments and thickener additives may also be included to enhance its widely diversified use.

  • MACE-Regular

    Mace-Regular is an aliphatic 1-component self-crosslinking waterborne formulation delivering excellent chemical and water resistance while providing good abrasion resistance and fast-setting properties.

    Mace-Regular is designed to be solvent-free and used as a tough exterior topcoat, sealer or as an underlying penetrating primer. The penetrating nature of this material promotes its use for direct topcoating on porous and non-porous substrates masonary, wood, non-glazed tile, stucco, metal, composites and certain polymers. These materials may also be used as a primer in many SuperSkin System’s coating applications.

    Mace-Regular is an air-dry system where it is normally spray or roll applied. This low viscosity dispersion dries clear and flexible in 10-15 minutes acquiring full-cure in 24 hrs or maybe forced dried at elevated temperatures. Mace-Flex provides up to 200% elongation with a tensile strength of 2400 psi. Acrylic color pigments and thickener additives may also be included to enhance its widely diversified use.

  • Rapid 1K

    Rapid 1K is an aliphatic 1-component waterborne formulation delivering good chemical and water resistance while providing good abrasion resistance and fast-setting properties. It is designed to be used as a primer or topcoat sealer. This material is 42% solids and can be used on porous and non-porous substrates. This material is available in flexible, semi-flexible or rigid film.

    Rapid 1K is an air-dry system where it is normally roll applied. This low viscosity dispersion dries clear and flexible in 10-15 minutes acquiring full-cure in 24 hrs or maybe forced dried at elevated temperatures. Rapid 1K-Topcoat is available in medium to high elongation formulations where flexibility is demanded. The high-flex version provides up to 600% elongation with a tensile strength of 2400 psi while the the medium-flex allows for 100%. Pigments and thickener additives may also be included to enhance its use.

  • WB Acrylic Modified Polyol

    WB Acrylic Modified Polyol is designed to be used in 2K waterborne coating formulations. This line of friendly no-VOC aliphatic polyols combine a unique combination of properties which lend themselves for use in exterior weather resistant applications. These polyols exhibit excellent durability regarding resistance to abrasion, chemicals and sunlight when mixed with an isocyanate crosslinker. They may also create an optically clear high gloss or matte finish which is available in rigid or flexible versions. WB Acrylic Modified Polyols materials may be color pigmented to for solid or translucent appearance.

    These acrylic polyols deliver up to 70% solids content and are available in fast drying or slow drying formulations resulting in mix ratios of eithr 2B:1A or 4B:1A. These polyols are intended to be used with polyisocyanate crosslinkers with mid to high degrees of %NCO such as WB Aliphatic Prepolymer-16 or WB Aliphatic Prepolymer-23. SuperSkinSystems offers a large range of WB Aliphatic Prepolymers form many customized coating formulations.

    Recommended storage conditions are to protect from frost and high heat, temperature range: 45-95 F (7-35 C) and kept in tightly closed containers no longer than 12 months. KEEP FROM FREEZING. Please refer to MSDS for Product Safety and Regulatory information.

  • WB Aliphatic Isocyanate Prepolymer

    WB Aliphatic Prepolymer is designed to be used in water-dispersible formulations. It may be used in many variations of an extremely tough optically clear weather resistant UV stable water-borne coatings. It exhibits excellent durability regarding resistance to abrasion, chemicals and sunlight.

  • WB Aliphatic Isocyanate Prepolymer-23

    WB Aliphatic Prepolymer-23 is designed to be used in water-dispersible formulations. It may be used in many variations of an extremely tough optically clear weather resistant UV stable water-borne coatings. It exhibits excellent durability regarding resistance to abrasion, chemicals and sunlight.